Reboot and select proper boot device computed or e notebook
The error message “Reboot and select proper boot device” typically indicates that the computer or notebook is unable to find a bootable operating system or device to start up from. Here are some steps you can take to resolve this issue:
- Check the BIOS settings: Make sure the boot order in the BIOS is correct and that the hard drive or SSD with the operating system is listed as the primary boot device. To enter the BIOS, you’ll need to restart your computer and press a specific key during startup (usually F2, F10, or Delete).
- Check the boot device connections: Ensure that the cables connecting the hard drive or SSD to the motherboard are securely connected and not loose. If you have a desktop computer, you can also try unplugging and plugging in the cables to ensure they are making proper contact.
- Check for bootable media: If you have a CD or USB drive connected to your computer, make sure it’s not inserted or remove it and try restarting your computer. Sometimes the computer will try to boot from a non-bootable device before the hard drive or SSD.
- Check the hard drive or SSD for errors: If none of the above steps work, it’s possible that the hard drive or SSD has errors or is failing. You can try running a disk check utility or running a diagnostic tool to check for any errors.
- Try reinstalling the operating system: If the above steps do not work, it may be necessary to reinstall the operating system. You can do this by booting from an installation media and following the on-screen instructions.
If none of these steps work, it may be best to consult a computer technician for further assistance.